Date: Wed, 18 Feb 1998 21:27:24 -0500 (EST)
From: Tim
Subject: Imp Profile.
This message forwarded by the Hillman List.
Does anyone have a set of line drawing profiles (top, side, front & back) of a Hillman Imp.
Tim Haynes
------------------------------------------------------------
IMPS DOWN UNDER &
The Australian Imp Register
http://www.poboxes.com/impair
Email: impair@poboxes.com
Hillman Imp Mk III
Hillman Imp GT
Date: Thu, 19 Feb 1998 19:45:38 -0500 (EST)
From: Paul Greville
Subject: Re: Imp Profile.
Hi Tim,
Sorry I can not help. Do you know of anyone wanting to buy standard and performance IMP parts - I am having a clearout to make way for my latest project and need the space.
regards,
Paul Greville
Date: Fri, 20 Feb 1998 06:20:33 -0500 (EST)
From: Allan Duncan
Subject: Re: Imp Profile.
In the "Body" part of the workshop manual. I could copy/scan them next week if you want.
Date: Fri, 20 Feb 1998 01:33:37 -0500 (EST)
From: Gary Henderson
Subject: Re: Imp Profile.
Hi Tim
The original 1964 brochure had a set of dimensioned line drawings, but the reproduction was quite small. I can look when I get home. (There is also a large "ghosted" drawing from 3/4-rear view in the brochure.)
Can't remember whether or not the Rootes Workshop Manual or the Haynes manual included them. Will check there also. The Rootes manual has a detailed floor-pan & suspension drawing.
Best regards
GaryH
Date: Fri, 20 Feb 1998 06:17:03 -0500 (EST)
From: Gary and Carol Henderson
Subject: RE: Imp profiles
Hi again Tim
Sorry, the brochure had only side and top views, plus the ghosted illustration; the Workshop Manual an underneath view with full dimensions. No front or rear.
Best regards
GaryH
Date: Sat, 21 Feb 1998 07:04:25 -0500 (EST)
From: Gary and Carol Henderson
Subject: RE: Imp Profile.
Hi Allan
I have visited TRL a couple of years ago. The HV lab was amazing, but it did seem that all was not well...
Please give my regards to Phil Day.
Cheers
GaryH