The Imp Site

Corley Conversions
(Ben Boult)

Now the official Imp Parts stockist for Chesman Engineering Ltd.

We are pleased to announce that we have taken over the Imp stock for Chesman Engineering and are now in a position to supply most competition engine parts and some standard road parts.
We can also undertake all Imp engine machining, from: liners fitted to blocks; lead free conversions; porting; etc. We also carry C/R Rally gears for Imps, Road and Competition clutch parts.

Specialist in:

Telephone/ Fax: 019 26 - 612 432

Date: Wed, 3 Nov 1999 18:51:28 EST
Subject: [imps] New and used parts and engine work and build.

Hi all.

Just to let you know that I have by accident expanded into the field of second hand Imp parts. As well as obtaining several cars that will not restore but can be taken apart.

I also have at present 3 complete cars that would restore and 1 Clan which has just had a full paint job and only needs to be put back together.

Thus Corley Conversions can now supply not only most of the new parts that are available for Imps, but also most used bits that you are likely to need.

I will, I hope, be able to supply at very reasonable prices.

As some of you will be aware I took on the Imp side of Chesman Engineering after Andy tragically lost his life. Thus my main stock will continue to be engine parts both Standard, Race and Rally, and the relevant machining that goes with engine work such as fitting liner, lead free conversions, head skimming, etc.

I also stock race clutches, fast road and standard clutches.

The new gearbox mounting that I am having made should be here any time and the stock of new engine mountings is getting lower so if you need one let me know.

If I can help anyone with parts or just information drop me an Email at

Regards to all you Impers out there.

Ben Boult

From: Simon Benoy
Date: Wed, 28 Jul 1999 21:34:57 +0100
Subject: [imps] Spares at National Weekend

Just a quick note on behalf of Ben Boult of Corley Conversions (who is having PC problems). He asked me to let people know that he will be at National on Sunday (he is running the Sprint at MIRA on the Saturday) with some spares as follows:

New high quality rear engine mounts which he has had remanufactured (bring your old mount with ally housing if you need it fitting)

Most parts for rebuilding engines including bearings, rings, gaskets, wills rings, valve springs, oil pumps, bronze gears.

High quality rotoflex bolts, clutch covers, universal throttle cables

Various secondhand standard bits (cheap).

If there is anything in particular which you need, give Ben a call on 01926 612432.

Date: Sat, 15 Jan 2000 19:41:38 EST
Subject: Re: [imps] Brake,Clutch and Fuel Pipes

Hi All,
If anyone needs brake pipes in copper just let me know what length you need and I will make them up to order.
Clutch pipes also.
Ben Boult.

Master builders / Parts suppliers
Imp Anatomy
The Imp Site
Having a file at my site on
a particular supplier and/or builder
does not imply recommendation.
It is information that you
may use to your advantage.